Kodak I7300 User Manual Page 95

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 94
4-24 A-61133 March 2003
Determining the image
mark position
The scanner requires that the leading edge of the image marks be
located even with the leading edge of the document images. Some
microfilmers place image marks after the leading edge of document
images. The Image Mark Position enables you to work with image
marks that have been placed in a non-
standard location in relation to the
images.
1. From the Image Marks tab, select Other if the image marks are
located in any other position than the lead edge.
2. Select Setup… to display the Image Mark Position dialog box.
3. Select a value from 1 to 99. The offset number will increase as the
image marks move further from the lead edge of the document. For
example:
NOTE: You cannot enter a negative offset value.
You can also use an eye loupe to measure the distance between the
image mark and the lead edge of the image. Divide this value by .003
inches. This is the offset value that will be entered in the Image Mark
Position dialog box.
4. Click OK.
Page view 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 173 174

Comments to this Manuals

No comments