Kodak I7300 User Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
A-61133 March 2003 3-3
Searching for next
occurrence of an image
address
The Search Again function allows you search for the next occurrence of
an image address on a roll of film.
To use the Search Again function:
Select Navigate>Search Again. The scanner will begin searching
the roll for another occurrence of the current image address.
NOTE: Film must have Random Batch Code to find another
occurrence of the image address. If found, it will stop at
the image, scan and display it. If not found, it will report
Image not found.
Using the odometer
mode
The Odometer mode allows you to search film by odometer units rather
than image marks. The value of an odometer unit is determined by the
odometer scale defined during Application setup.
To retrieve images using the odometer mode:
1. Select the desired odometer mode application.
2. Advance to a position on the film that you want to establish as your
reference point.
3. Enter the odometer unit preset value, if any, then select Set A, on the
Image Retrieval keypad.
4. To initiate a retrieval, enter the desired odometer unit value, then
select Srch, on the Image Retrieval keypad.
NOTE: If the odometer scale is equal to or greater than 1 inch, a
format of X.XX must be used to enter the odometer unit
value. If the odometer scale is less than 1 inch, a format of
X must be used to enter the odometer unit value.
Examples:
If the odometer scale is 1 inch, then 1 odometer unit equals 1 inch.
To advance 180 inches into the film, enter 180.00 in the Image
Retrieval keypad.
(180 inches ÷ 1 inch per odometer unit = 180 odometer units)
If the odometer scale is 5 inches, then 1 odometer unit equals 5inch.
To advance 180 inches into the film, enter 36.00 in the Image
Retrieval keypad.
(180 inches ÷ 5 inches per odometer unit = 36 odometer units)
If the odometer scale is 12 inches, then 1 odometer unit equals 12
inch. To advance 180 inches into the film, enter 15.00 in the Image
Retrieval keypad.
(180 inches ÷ 12 inches per odometer unit = 15 odometer units)
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 173 174

Comments to this Manuals

No comments