Kodak I7300 User Manual download pdf (Page 51)

3-4 A-61133 March 2003

Searching for a preset

image address

The scanner is set to count the first image mark on a roll of film as 1 or

1.0 or 1.0.0 (depending on the number of levels in the image address). If

the first image on the film has an image address or sequence number

other than 1 or 1.0 or 1.0.0, you can use the Set A or Set B function on

the keypad to specify the starting sequence number. To do this:

1. Insert the roll of film you want to search.

2. Enter the starting sequence number (or image address) that is

listed on the film storage box. For example: the first image on the

roll is sequence number 3.0.0.

NOTE: If the sequence number (or image address) is not

documented, it may be imprinted next to the image on film,

as shown below. Select the + key on the keypad. The film

will advance to the first image. If the sequence number is

available, use it as the beginning point to search for the

actual image you want to retrieve.

3. Select Set A or Set B (depending on the film format being used).

For more information, see “The Image Retrieval keypad” in Chapter

4. Enter the image address of the image you want to retrieve and

select Srch.

Image address or

Sequence No.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 173 174

No comments

Kodak I7300 User Manual Page 51