Kodak I7300 User Manual download pdf (Page 80)

A-61133 March 2003 4-9

3. Film Reduction. Select the Film Reduction ratio for the film used. It

is important that this value be accurate to achieve the correct print

size results. Select a value from 1 to 59.

4. Overscan. If desired, select a value in the Images Before and/or

Images After list boxes. Overscan is intended for use with single-

level check, or similar-type applications (do not use with images

larger than 8 ½” x 5” or A5).

Enter a value from 1 to 5 in the Images Before and/or Images After

fields. For example, if you enter 2 in the Images Before field, the

scanner will begin scanning 2 images before the image address you

actually requested. If you enter a number in the Images After field, it

will scan that number of images past the one you requested.

This function is useful when the image indexing is not perfectly

accurate and may be off by a few images. When used with the

Image Area definition, you will be able to view several consecutive

checks on each scan.

NOTES:

• The larger the scan area, the larger the file size will be to

process.

• When Overscan values are specified, you should also enable

Auto Scan Length, to achieve the best results.

5. Image Area. Select one of the image area options  Minimum,

Short, Medium, Long, Maximum and User defined. The following

illustration shows the difference between the smallest (Minimum)

and the longest (Maximum) image area options. The Short, Medium

and Long options will display an image area between the Minimum

and Maximum image area.

Minimum Image Area Maximum Image Area

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 173 174

No comments

Kodak I7300 User Manual Page 80