Kodak I7300 User Manual download pdf (Page 53)

3-6 A-61133 March 2003

NOTE: If you want to change the path of the folder where images

will be saved, and/or the conventions to be used for naming

files, select Setup from the Batch Scan dialog box to

display the Setup Naming dialog box.

• Enter the path in the root directory text box, or click the

Change… button to select the desired directory.

• Change file naming conventions if desired.

• Click OK to save the change.

More information regarding root directory and file naming conventions is

found in the section entitled “Changing Naming Convention Properties”

in Chapter 4.

IMPORTANT: Improper setup of root directory and file naming

conventions can cause image files to be overwritten

without notification.

2. Enter the addresses (or sequence numbers) of the images to be

processed in the Enter Image Range field. Individual addresses can

be entered, and/or a range(s) of addresses. Use a dash to separate

the start and end values of a range, and a semicolon to separate

individual addresses and ranges.

Following are some examples:

• To enter multiple ranges for 1 level film: 1-5;7-9

• To enter multiple ranges for 2 level film, including individual

addresses: 1.0-1.5;3.0;4.10-4.30

NOTE: To accommodate European keyboards, a comma can be

used in place of a period in an address, e.g., 1,0-

1,5;3,0;4,10-4,30.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 173 174

No comments

Kodak I7300 User Manual Page 53