Kodak 8965758 Specifications Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 127
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
4 Operational Overview
4 Operational Overview
Before you begin to scan documents, there are some functions of the scanner you
should know. This section takes you through the steps of powering the scanner on and
off, and familiarizes you with the scanner’s control panel (i.e. menus, commands, error
messages, function keys etc.). Once you have learned these basics you will be
introduced to daily operational procedures, including document preparation, setting
scanner parameters and finally, scanning documents.
4.1 Power On / Power Off
Once you have connected the scanner to both an AC power source and the host PC,
you are ready to power on the scanner. The following explains how to power the scanner
on and how to power it off.
4.1.1 Power On the Scanner
.
Caution
Never connect or disconnect the SCSI cable from the rear panel of the
scanner while power is being applied to the scanner or to the host PC. Doing
so may damage the scanner.
Take the following steps to power on the scanner:
1. Make sure the AC power cord is properly connected to both outlets.
2. Make sure the host PC is powered OFF.
3. Make sure the SCSI cable is properly connected to the scanner and the host PC,
inserting the IEL-320 end, first.
4. Make sure the scanner transport cover is closed securely.
5. Press the power switch on the scanner’s rear panel. When power is applied, the
scanner goes through a short initialization sequence while displaying messages on
the control panel’s LCD. When initialization is complete, the LCD steadily displays
the Home menu (refer to section
4.2.2 Control Panel LCD for an explanation of these
messages and the Home menu).
S006555 Rev D 17 of 113
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 126 127

Comments to this Manuals

No comments