Kodak 8965758 Specifications Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 127
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
3 Scanner Overview
Power Receptacle
The power receptacle for your scanner is located just left of the vertical air vent located
along the rear right side of the scanner. A power cord connects to this receptacle and to
an external AC power source (NEMA-3 to IEC-320).
Power Switch
The power switch for the scanner is located between the right vertical air vent and the
power receptacle. This is the main switch for applying power to and removing power
from the scanner (0 is OFF, 1 is ON).
3.4 AC Power & Host PC Connection
Once you have set up the scanner, you are ready to connect it to an AC power source
and to the host PC.
Take the following steps to connect the scanner to AC power:
1. Plug the female end of the power cord into the power receptacle on the rear of the
scanner.
Note
You can plug the scanner into either a 100 or a 240 VAC 50/60 Hz outlet. The
scanner identifies the voltage and automatically adjusts itself.
2. Connect the three-pronged male end of the power cord into a properly grounded,
three-hole, AC outlet.
Figure 3.5: Power Cord Receptacle
S006555 Rev D 15 of 113
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 126 127

Comments to this Manuals

No comments