Kodak 8965758 Specifications Page 119
- Page / 127
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
8 Glossary
Separation roller – The separator roller is the lower feeder roller. It holds back all but
the top page in the stack of documents to be scanned. This roller allows the skimmer
module to feed a single document at a time into the transport.
SharpShooter
TM
– Trademark name referring to the new, tri-linear CCD camera design
used by XF.
Side access panel - The door panel located on the left side of the scanner. It allows
access to the lamps and color filters after the scanner transport cover has been opened.
Side exit guides – Side exit guides are the side rails located on the exit tray that assist
in neatly stacking documents as they leave the scanner.
Simplex scanner - A scanner designed to scan a single side of a document as it passes
through the scanner.
Skew – Skew occurs as a result of feeding a document into the transport at an angle.
The resulting image appears crooked or skewed on the display and also prints the same
way. To minimize skew, make sure the document butts up against the left document
feed guide.
Skimmer – The mechanism that is used to automatically feed documents into the
transport one at a time. It is often referred to as the skimmer assembly and contains
skimmer rollers.
Skimmer assembly - The skimmer assembly is comprised of a skimmer body that is
attached to the rear feed rollers, the front skimmer rollers, and the associated bearings,
pulleys and belt.
Skimmer cleaning sheet – Specialized pieces of paper used to remove ink and dirt
from the skimmer rollers.
Stop guide – The Stop Guide is a piece of plastic located at the outer end of the exit
tray that is used to stop documents from falling off the exit tray as they exit the scanner.
It can be adjusted to accommodate various document lengths.
Stream feeding – Stream feeding is the continuous feed of overlapping documents into
the transport, resulting in bad images.
Test mode - The manner in which documents are moved from the Automatic Document
Feeder into the scanner’s transport. Used to test and verify the document feed on a
scanner, the Test Mode allows the user to continuously scan documents without having
to generate a scan command from the host PC (see
Feed Modes).
Throughput – The number of documents that can be scanned properly per minute by a
scanner.
Transport - The mechanical system for moving a document through the scanner.
Transport cleaner – Transport cleaner refers to specialized cleaning sheets that, when
run over the black rollers within the transport, clean dirt, dust and ink from them.
Uncontrolled documents – Uncontrolled documents is the name used to refer to those
document batches that require scanning, which are rarely uniform; differing in size and
weight.
VRS - VRS (VirtualReScan) is an electronic check-point for scanned images. As images
pass through the scanner, VRS performs a multi-point inspection of each document.
S006555 Rev D 105 of 113
- Operator Manual 1
- Contact Information 2
- Release Notes 3
- Table of Contents 5
- Spectrum XF Operator Manual 6
- S006555 Rev D 6
- List of Figures 8
- S006555 Rev D 10
- List of Tables 11
- Compliances 12
- S006555 Rev B xiii 13
- Symbols You Should Know 14
- 1 Introduction 15
- 1.2 Safety Guidelines 17
- 2 Receipt and Operating 19
- Environment 19
- 2.3 Scanner Environment 22
- 3 Scanner Overview 23
- 3.2 Front of the Scanner 25
- 3.3 Rear of Scanner 27
- 3 Scanner Overview 29
- S006555 Rev D 15 of 113 29
- 4 Operational Overview 31
- 4.2 Control Panel 32
- 4 Operational Overview 33
- S006555 Rev D 19 of 113 33
- 4.2.2 Control Panel LCD 34
- S006555 Rev D 21 of 113 35
- 4.3 System Setup 37
- S006555 Rev D 25 of 113 39
- Feature 41
- S006555 Rev D 29 of 113 43
- S006555 Rev D 31 of 113 45
- S006555 Rev D 33 of 113 47
- 4.4 Optional Imprinter 48
- S006555 Rev D 35 of 113 49
- Imprint String 50
- S006555 Rev D 37 of 113 51
- Attributes 52
- S006555 Rev D 39 of 113 53
- S006555 Rev D 41 of 113 55
- S006555 Rev D 43 of 113 57
- 5 Normal Operating Routine 59
- 5.2.2 Batch Size Selection 60
- 5.2.3 Document Feed Modes 61
- 5 Normal Operating Routine 63
- S006555 Rev D 49 of 113 63
- Parameters 65
- Drop Feature 66
- S006555 Rev D 53 of 113 67
- FRONT BACK 68
- Color Drop: Custom 1 68
- ON OFF 68
- ON OFF SET 68
- S006555 Rev D 55 of 113 69
- 5.2.8 Setting Camera Gamma 70
- NEXT 71
- Color Gamma: 71
- 5.3 Scanning Documents 72
- Documents 73
- Press CLEAR or MF Ignore 74
- S006555 Rev D 61 of 113 75
- 6 Operator Maintenance 77
- 6.3 Code Revision Numbers 78
- 6.4 General Maintenance 79
- S006555 Rev D 67 of 113 81
- Glass Cover 83
- S006555 Rev D 71 of 113 85
- S006555 Rev D 73 of 113 87
- DO NOT TURN OFF POWER! 88
- 6.4.4 Software Download 89
- Receiver Sensors 91
- S006555 Rev D 79 of 113 93
- S006555 Rev D 81 of 113 95
- Skimmer Assembly 97
- S006555 Rev D 85 of 113 99
- Sleeve Assembly 101
- 6 Operator Maintenance 103
- S006555 Rev D 89 of 113 103
- 6.5 Imprinter Maintenance 104
- S006555 Rev D 91 of 113 105
- 7 Troubleshooting 107
- 7.1 Error Messages 108
- 7 Troubleshooting 109
- S006555 Rev D 95 of 113 109
- S006555 Rev D 97 of 113 111
- S006555 Rev D 99 of 113 113
- 8 Glossary 115
- 8 Glossary 117
- S006555 Rev D 103 of 113 117
- S006555 Rev D 105 of 113 119
- 9 Index 121
- 9 Index 123
- S006555 Rev D 109 of 113 123
- S006555 Rev D 111 of 113 125
- S006555 Rev D 113 of 113 127
© 2020, manymanuals.com. All rights reserved. | 0.510 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals