Kodak ESP OFFICE 2100 User Manual download pdf (Page 87)

www.kodak.com/go/aiosupport 81

KODAK ESP Office 2100 Series All-in-One Printer

Determining whether your phone line is dedicated or shared

To connect your printer for faxing correctly, you need to determine whether your

phone line is shared or dedicated.

•A dedicated phone line is one that has only this printer and no other devices

connected to it. If you have a dedicated line, connect your printer as described

for your type of phone service (see Connecting to a Standard or Cable telephone

service, page 79, Connecting to a Digital Subscriber Line (DSL), page 79, or

Connecting to Internet telephone service (Voice-Over-Internet Protocol or

VOIP), page 80).

•A shared phone line is one that has several devices connected to it, such as a

phone and/or answering machine as well as the printer. If you have a shared line,

connect your printer in one of the following ways, based on the devices you have

connected to the same phone line.

If you share the line with an answering machine or telephone:

1. Connect one end of the phone cord that came with the printer into the LINE IN

port on the back of the printer.

2. Connect the other end of the phone cord into a wall phone jack, DSL filter, or

ATA, depending on the type of telephone service you use.

3. Connect one end of the phone cord for your answering machine into the EXT

OUT port on the back of the printer.

4. Connect the other end of the phone cord into the answering machine or

telephone.

NOTE: If you have an answering machine, set the number of rings to answer on the

printer to a higher number than the rings to answer for the answering

machine (see

Rings to Answer under Selecting fax settings, page 83).

Phone with

Configuration for connecting an answering

machine with a standard telephone service

answering machine

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 136 137

No comments

Kodak ESP OFFICE 2100 User Manual Page 87