Kodak 500 User Manual download pdf (Page 122)

A-61628 December 2011 6-5

NETBIOS usage — in network environments that use routers it is

common practice to block NETBIOS traffic on your router. You may

need to know the IP address of the server where you want to scan

documents. By substituting the IP address of the server instead of the

NETBIOS computer name, you can bypass the network traffic

restrictions that may cause network scanning to fail. For example, the

previously defined network address: \\acmeserver\scanfolder should be

replaced with something similar to: \\192.168.2.10\scanfolder.

Updating your Scan

Station

There are four ways to update your Scan Station:

• Method 1. Uploading using the KSS500 - Scanner Admin

application. The Scan Station will automatically recognize the new

configuration data or update package and perform an update

automatically. See the section entitled, “Method 1” later in this

chapter for more information.

• Method 2. The administrative configuration file and optional update

package is stored on a network drive and the Scan Station is

configured to poll this shared folder at a specific day and time for

updates. See the section entitled, “Method 2” later in this chapter for

more information.

• Method 3. The administrative configuration file is stored on a USB

drive, inserted into a Scan Station, which is then updated. This

method is manual and must be repeated for each Scan Station on the

network. See the section entitled, “Uploading configuration settings

using a USB drive” in Chapter 3 for more information.

• Method 4. The administrative configuration file is stored on a USB

drive with an update package. This causes the Scan Station to be

updated with new firmware. See the section entitled, “Method 4” later

in this chapter for more information.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 161 162

No comments

Kodak 500 User Manual Page 122