Kodak i600 Series User Manual download pdf (Page 53)

A-61500 April 2007 5-17

Replacing the pre-

separation pad

Change the pre-separation pad when the frequency of double-fed

documents increases.

1. Open the pod.

2. Remove the pre-separation pad.

3. Install the new pre-separation pad. Be sure it snaps into place.

4. Close the pod.

Replacing the imaging

guides

The imaging guides should be replaced when they are heavily

scratched and defects show in the image.

NOTE: Handle the imaging guides carefully as to not put fingerprints on

the guides.

1. Open the pod.

2. Turn the screw on each end of the upper imaging guide to remove it

from its position.

3. Install the new imaging guide and turn the screws to secure the

imaging guide.

4. Repeat Steps 2 and 3 to replace the lower imaging guide.

5. Close the pod.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 69 70

No comments

Kodak i600 Series User Manual Page 53