Kodak EASYSHARE C603 User Manual download pdf (Page 49)

Troubleshooting

www.kodak.com/go/support

Camera/computer communications

Ready light glows

steady red.

■ Transfer pictures to the computer (page 13), delete pictures from the

camera (page 11), switch image storage locations (page 27), or insert

a card with available memory (page 3).

■ Wait. Resume picture taking when the light turns green.

■ Change the image storage location to internal memory (page 27), or

use a different card.

Ready light glows

steady green.

■ Camera is operating normally.

If... Try one or more of the following

The computer does

not communicate

with the camera.

■ Visit www.kodak.com/go/c643support or

www.kodak.com/go/c603support.

■ Turn on the camera (page 2).

■ Install new batteries (page 1) or charge rechargeable batteries.

■ See the Power Management section of the laptop user’s guide to

disable this feature.

■ Connect cable to camera and computer port (page 13).

■ Install the software (page 12).

■ Disconnect the USB cable. Close all open applications. Re-install the

software (page 12).

■ Disconnect camera from the computer. Close all software applications,

reconnect camera.

Cannot transfer

pictures.

(The Add New

Hardware Wizard

cannot locate

drivers.)

■ Disconnect USB cable. (If using camera dock or printer dock,

disconnect cable and remove camera from dock). Close all open

applications. Re-install the software (page 12).

■ Disconnect the USB cable. Close all open applications. Re-install the

software (page 12).

If... Try one or more of the following

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

No comments

Kodak EASYSHARE C603 User Manual Page 49