Kodak DX7590 User Manual download pdf (Page 28)

Taking pictures and videos

20 www.kodak.com/go/support

Using the flip-up flash

Use the flash when you take pictures at night, indoors, or outdoors in heavy

shadows. You can change the flash setting in most Still modes, except Burst;

the default setting is restored when you exit the mode or turn off the camera.

Turning on the flash

Changing the flash settings

Flash-to-subject distance

Zoom position Flash distance

Wide angle 2–16.1 ft (0.6–4.9 m) @ ISO 140

Telephoto 6.6–12.1 ft (2.0–3.7 m) @ ISO 140

Flash-icon

behavior

Cause Action

Blinking Flash is charging. Wait. Take picture when the icon stops

blinking.

Flash button is pressed,

flash unit is closed.

Open flash unit or take the picture

without flash.

Slide the open flash switch to raise

the flash and to turn it on.

NOTE: The flash unit must be open

to use the flash and to change the flash

modes. An Open Flash warning appears

on the EVF/LCD screen when the flash unit

needs to be open.

open

switch

Press the flash button repeatedly to scroll

through the flash modes (see Flash modes

table).

NOTE: The active flash icon is displayed in

the EVF/LCD screen status area.

button

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 81 82

No comments

Kodak DX7590 User Manual Page 28