Kodak INNOVATION A-61506 User Manual download pdf (Page 18)

A-61506 September 2006 17

Verifying a custom

color table using the

Scan Validation Tool

Following are procedures for verifying a custom color table using the

Scan Validation Tool. For detailed procedures on using the Scan

Validation Tool see the Image Processing Guide for Kodak i800 Series

Scanners, A-61510 or the Image Processing Guide for Kodak i600

Series Scanners, A-61504.

1. Open the Scan Validation Tool.

NOTE: Be sure Save Images to Files is checked.

2. From the Imaging tab, select the custom color table from the drop

down list you want to verify.

NOTES:

• When duplex scanning, you must specify the desired table for

both the front image and rear image.

• If you have not saved your custom color table in the default

directory, it will not appear in the drop-down list and you will need

to go to the Setup tab. Click Download to locate and download

the desired table.

3. Click OK on the Kodak Scanner Properties dialog box.

4. Scan your representative documents to capture your images.

5. Exit the Scan Validation Tool.

6. Use an image viewer, e.g., Imaging for Windows, to open and

compare the image files you just captured to the corrected image

you saved previously when creating your custom color table.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Kodak INNOVATION A-61506 User Manual Page 18