Kodak DC265 User Manual download pdf (Page 76)

5-8

Using a USB cable to connect

The camera can connect to a computer using the USB cable included in your

camera package.

To connect to your computer with a USB cable:

Using an infrared transceiver to connect

Your camera automatically detects when a compatible IrDA device is present.

1 Plug one end of the USB cable into the USB

port.

2 Open the serial/USB port on the side of your

camera.

3 Plug the other end of the USB cable into the

serial port.

4 Set the Mode dial to Connect.

5 Turn on the camera.

If you get a message on your computer stating

that you are not connected, refer to the

USB.PDF, or for MACINTOSH Computers,

Connect.PDF, document or the online help for

troubleshooting information.

Place the camera facing the computer IrDA

transceiver.

When the two IrDA ports establish contact, the

computer emits a beep.

☞ While in the Review mode, you can

transfer pictures from one camera to

another using an IrDA connection. Refer

to “Copying marked pictures from

camera to camera” on page 4-10.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 145 146

No comments

Kodak DC265 User Manual Page 76