Kodak CX7530 User Manual download pdf (Page 49)

Troubleshooting

www.kodak.com/go/support

43

Picture is too

light.

The subject was too

close for flash.

Move so there is at least 2 ft

(0.6 m) between camera and subject.

The light sensor is

covered.

Hold the camera so your hands or other

objects do not cover the light sensor (page i).

Too much light. Decrease Exposure Compensation (page 18).

Auto exposure was

not achieved.

To take the best possible pictures, press the

Shutter button halfway and hold. When

the ready light glows green, press the Shutter

button the rest of the way down to take

the picture.

Picture is not

clear.

The lens is dirty. Clean the lens (page 52).

Subject too close

when taking picture.

Move so there is at least 23.6 in. (60 cm)

between the camera and the subject, or at

least 5 in. (13 cm) at Wide in Close-up mode.

Subject or the camera

moved while the

picture was taken.

Place the camera on a flat, steady surface or

use a tripod.

Auto-focus was not

achieved.

To take the best possible pictures, press the

Shutter button halfway and hold. When

the ready light glows green, press the Shutter

button the rest of the way down to take

the picture. (If the orange light blinks, release

the Shutter button and recompose picture.)

Camera is in Close-up

mode.

Use Close-up mode when subject is 5-28 in.

(13-70 cm) from the lens in Wide Angle; 9-28

in. (22-70 cm) in Telephoto.

The camera

does not

recognize

SD/MMC card.

The card may not be

SD/MMC certified.

Purchase a certified SD/MMC card.

The card may be

corrupt.

Reformat the card (page 22).

Caution: Formatting deletes all pictures and

videos, including protected files.

Card is not properly

inserted in camera.

Insert a card into the slot, then push to seat

(page 7).

Problem Cause Solution

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 65 66

Comments to this Manuals

No comments