Kodak EasyShare Photo 500 User Manual download pdf (Page 33)

3-12 A-61408 September 1995

Scanning Documents

After you have prepared the scanner and your documents, you

are ready to begin scanning.

Automatic Feed Method

1. Make sure you select the correct scanning operation condi-

tions and values.

2. Place the feed shelf in the up position.

3. Pick up a stack of documents up to 1.5 inches (38 mm) thick.

Hold the stack with the front sides facing up and the top of the

documents facing toward the scanner. Tap the bottom edge of

the stack against a flat surface so the documents are in an

even bundle.

4. Fan the stack of documents so the leading edge of the top

document sticks out the farthest.

5. Make sure the power switch is on, then press Run.

6. Place the stack of documents into the feeder so the leading

edge of the first document meets the feed roller. Each docu-

ment will be drawn into the feeder, scanned, and deposited

face down in the exit hopper in the same order it entered the

feeder.

NOTE: Ensure the documents are center-fed so each document

covers the 2.5-inch required width as indicated by the

label on the feed tray.

11 X 17"

2.5"

8.5 X 11"

Feed Tray Label

NOTE: The scanner is designed so each document automatically

gravitates into the feeder. Depending on the friction

between the documents, the automatic flow of the docu-

ments into the feeder may be inhibited. If the document

flow is inhibited, gently push the top document towards

the feeder to re-establish automatic feeding.

1 ... 32 33 34 ... 112

No comments

Kodak EasyShare Photo 500 User Manual Page 33