Kodak Z712 IS User Manual download pdf (Page 57)

Troubleshooting

www.kodak.com/go/support

Direct printing (PictBridge) problems

Picture is too light

■ Reposition camera to reduce the amount of available light.

■ Turn flash off (page 9).

■ Move so that the distance between you and the subject is within the

effective flash range (page 9).

■ To automatically set exposure and focus, press the Shutter button

halfway. When the AF/AE indicator turns green, press the Shutter

button completely down to take the picture.

■ If using P, A, or S mode, adjust Exposure compensation (page 36).

Picture is not clear

■ To automatically set exposure and focus, press the Shutter button

halfway. When the AF/AE indicator turns green, press the Shutter

button completely down to take the picture.

■ Clean the lens (page 56).

■ Make sure camera is not in Close-up/Macro mode if you are more

than 27.6 in. (70 cm) from your subject. (Move further away if you

are using the zoom lens in Close-up/Macro.)

■ Place the camera on a flat, steady surface or use a tripod, especially

in high-zoom settings or in low light.

If Try one or more of the following

Cannot locate desired picture.

■ Turn on the camera. Make sure the camera is

accessing internal memory/card or Favorites.

■ If you are using Direct print, use the menu to change

the image storage location.

The Direct print menu interface

turns off.

Press any button to redisplay the menu.

Cannot print pictures.

■ Ensure that there is a connection between camera

and printer (page 44).

■ Ensure the printer and camera have power.

If Try one or more of the following

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 74 75

No comments

Kodak Z712 IS User Manual Page 57