Kodak EasyShare 5500 User Manual download pdf (Page 42)

Chapter 4

Two-sided Printing

You can print on both sides of the paper.

Watermark

You can select or create a background watermark.

Print Photos from a Camera

1 Connect your camera to the EasyShare AiO. The PictBridge logo is displayed on the LCD.

2 Load the photo tray with photo paper (See Load Photo Tray in Chapter 3).

3 Use your camera to select and print photos.

Print Photos from the Control Panel

The Photo Print mode is initiated by pressing the Photo button, inserting a memory card, or connecting a

USB device to the Kodak EasyShare All-in-One.

1 Insert a memory card into the appropriate slot, a mass storage device into the USB port, or connect a

digital camera to the USB port. The last photo is displayed.

WARNING

Never attempt to remove a memory card while it is being accessed. Doing so can damage

files on the card. You can safely remove a card only when the status light next to the slots is

not blinking.

2 Load the main tray (see Load Main Tray in Chapter 3) or photo tray (See Load Photo Tray in Chapter 3)

with photo paper.

NOTE: The Photo Tray only supports 4x6 inch and 100x150 mm photo paper.

3 Press a to select the number of prints for this photo.

4 Press ` to preview the next photo.

TIP: To select all the photos on a memory card or mass storage device, hold down the OK button for 2

seconds. Holding down the OK button again for 2 seconds will de-select all the photos.

5 Repeat Steps 3 and 4 until you are finished selecting photos.

6 Press Start to print the selected photos or Photo to set print options.

7 Set print options.

See Set Print Layout

See Set Number of Prints

See Set Color

See Set Print Quality

After a photo is printed, it is de-selected.

38 Kodak EasyShare 5500 AiO

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 119 120

No comments

Kodak EasyShare 5500 User Manual Page 42